[GUIDE] Lenovo ThinkPad T510/510i (plus T410 and W510) 10.6-10.7-10.8-10.9 all working OK! 2013.11.12 Update
joshhh 80 33-42 Minuten
499 posts in this topic
OS X Lion on ThinkPad T510i:
ThinkPad T510i 4314-6BG (also works on T410, T410 AMT, T510 and W510)
Before asking it thread. Please fill data about your hardware and software. Without it I can’t help
Custom working WLAN cards in Lenovos
There is a list of current half and full size WLAN cards working native in OSX
I use Atheros AR5BHB92 (Atheros 9280) in my T510i + modded BIOS without whitelist check
And one important remark about full size cards in all lenovo lineup – WWAN slot is only USB or USB+mSATA capable on Lenovos, there is no mini-PCIe lines in WWAN slot – so full size cards won’t work at all. Only way to drive it is to make some mini-PCIe cable extender for WLAN slot and place connected to that cable card instead of WWAN.
Half size cards
Atheros AR5B93
– 802.11 b/g/n
– single-band: 2.4GHz only. МасOS up to 150 Mbps, Windows up to 300 Mbps.
– PCI-id [168c:002a]
– Native in Mac OS X 10.6, 10.7 и 10.8. AirDrop Works.
Atheros AR5BHB92
– 802.11 a/b/g/n
– dual-band: 2.4GHz + 5GHz. МасOS up to 150 Mbps on 2.4GHz and up to 300 Mbps on 5GHz, Windows up to 300 Mbps on both bands.
– PCI-id [168c:002a]
– Native in Mac OS X 10.6, 10.7 и 10.8. AirDrop Works.
Broadcom BCM94322HM8L
– 802.11 a/b/g/n
– dual-band: 2.4GHz + 5GHz. МасOS up to 150 Mbps on 2.4GHz and up to 300 Mbps on 5GHz, Windows up to 300 Mbps on both bands.
– PCI-id [14e4,432b]
– Native in Mac OS X 10.6, 10.7 и 10.8. AirDrop Works.
2013.11.12
-OS X Mavericks update guide with links
2012.12.02
– Calibration profile for
1920×1080 AUO B156HW01 V5 95% Gamut screen
2012.01.22
HDMI Audio freeze desktop after boot for about few minutes
I rollback some changes to dsdt and replaced older AppleHDA with no HDMI patch applied
Files here http://www.insanelym…dpost&p=1788533
2012.01.21
Donations are welcome
Latest DSDT and kexts are included in archive below
Latest DSDT with Battery indication fix and fan sensor fix by acediac, works well with Lion AppleACPI 1.4, but for now USB wake after sleep doesn’t work well
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
Hey,
thanks for Mini-Guide 
. I tried the AppleHDA.kext but looks like it doesn’t work with my W520.
Quote
Video – screen brightness values was corrected a bit
Can you explain how? Did you get the same brightness level after a reboot?
Gigabyte GA-Z77N-Wifi | i7-3770K @ 4,3GHz | 16GB Kingston HyperX | RAID0 Intel SSD 330 (2x 180GB) | EVGA GTX680 OC | Custom Oak PC-Case | Watercooling by AquaComputer
Share this post
Link to post
Share on other sites
For AppleHDA you need to add this code to your dsdt
After AppleHDA should work well
Screen brightness levels saved after reboot if i change it but scale levels not correct compare to ubuntu
On ubuntu I have linear brightness level changing, in osx I’ve got exponential growth from minimal brightness(screen is off, in ubuntu it’s dim a little) to maximum, first 3-5 low levels increase brightness fast to about 70% of maximum, other do it with little steps.
If you know how to fix pwm-info section in video card settings in dsdt tell us, I have dump of brightness levels from ubuntu think it may help
Device (HDEF)
{
Name (_ADR, 0x001B0000)
Name (_S3D, 0x03)
Name (RID, Zero)
Name (_PRW, Package (0x02)
{
0x0D,
0x04
})
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x0E)
{
"AAPL,slot-name",
Buffer (0x09)
{
"Built in"
},
"device-id",
Buffer (0x04)
{
0x69, 0x50, 0xF1, 0x14
},
"layout-id",
Buffer (0x04)
{
0x0C, 0x00, 0x00, 0x00
},
"model",
Buffer (0x1A)
{
"HD Audio Conexant Cx20585"
},
"name",
Buffer (0x11)
{
"Conexant Cx20585"
},
"device_type",
Buffer (0x11)
{
"Audio Controller"
},
"PinConfigurations",
Buffer (One)
{
0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
}
On 1/11/2012 at 10:29 PM, gothic860 said:
Hey,
thanks for Mini-Guide . I tried the AppleHDA.kext but looks like it doesn’t work with my W520.
Can you explain how? Did you get the same brightness level after a reboot?
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
I’ve seen this guide yesterday. Good work!
Everything works except that the sleep on psu will not work. The ThinkPad goes to sleep, but 2 seconds later it wakes up.
Is there a little tool for the menubar to switch from the speakers to headphones?
I have a T510 4349 with nVidia NVS 3100m (512MB).
Share this post
Link to post
Share on other sites
For sleep on psu check my dsdt in sections UHCI1/UHCI2 and replace its content, after that sleep should work perfect
On 1/18/2012 at 8:55 AM, Erdbeeere said:
Everything works except that the sleep on psu will not work. The ThinkPad goes to sleep, but 2 seconds later it wakes up.
If you still use VoodooHDA you can switch speakers with Alt/Option+Click, for AppleHDA auto switching works perfect itself
On 1/18/2012 at 8:55 AM, Erdbeeere said:
Is there a little tool for the menubar to switch from the speakers to headphones?
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
Thanks, i have installed Lion new and i found a bug in the applehda kext or in the dsdt.
If I turn the sound with the – button to no mute, the volume bar in the menubar is at 0 percent. If i press the + volume button on the keyboard, the volume bar at the menubar is at 95% and the thinkpad displays 1 from 15?. So the sound volume display isn’t sync.
The turbo fan mode is also broken.
However, the hdd was recognized as an external hdd. (The hdd is in the ultrabay, the ssd with win7 is in the hdd bay)
The sleep was fixed with the new install.
But anyways, your work is great. I’m happy to have osx on my T510 
Update:
At home I’m using a Docking Station, so i’ve tested 2 things:
Audio isn’t working
No Displayport-port isn’t working
Share this post
Link to post
Share on other sites
Can you share the updated files from the 21.01.2012 Update?
I would like to test the new Displayport-feature
It’s great to see someone that wants a T510 with Lion. Have you a docking station? I would like to use the external screen in the dock without the internal display – like a real mac 
Update 21-01-2012 19:51:
I’ve seen your „easy install“ zip file, just great. I would remove the default partition from the plist. Just a little tip from me.
By the way, any solution for the fingerprint reader?
Share this post
Link to post
Share on other sites
I recommend you to see my latest updates above.
Try to update your installation with all my kexts and dsdt
Yes this may occur with AppleHDA until I get correct pin configuration of CX20585 codec. Now It works 99% perfect with sound.
On 1/19/2012 at 1:56 PM, Erdbeeere said:
Thanks, i have installed Lion new and i found a bug in the applehda kext or in the dsdt.
If I turn the sound with the – button to no mute, the volume bar in the menubar is at 0 percent. If i press the + volume button on the keyboard, the volume bar at the menubar is at 95% and the thinkpad displays 1 from 15?. So the sound volume display isn’t sync.
I’ve changed Turbo fan mode to silent mode. If you need this check ghotic860 post about osx on w520
On 1/19/2012 at 1:56 PM, Erdbeeere said:
The turbo fan mode is also broken.
That strange about hdd. Mine default hdd shows as internal. eSATA and SataLink card hdds as external as it should be.
On 1/19/2012 at 1:56 PM, Erdbeeere said:
However, the hdd was recognized as an external hdd. (The hdd is in the ultrabay, the ssd with win7 is in the hdd bay)
I’ve changed some things about sleep in latest changes(USB and bluetooth detection)
On 1/19/2012 at 1:56 PM, Erdbeeere said:
The sleep was fixed with the new install.
About docking station. Please check my latest edits, I’ve fixed DisplayPort detection and maybe it will work with Dock now
About sound via docking station, I need more info about that. Maybe some switches inside lock sound or it electronically enabled/disabled. Need more info from ioreg to deal with.
On 1/19/2012 at 1:56 PM, Erdbeeere said:
Update:
At home I’m using a Docking Station, so i’ve tested 2 things:
Audio isn’t working
No Displayport-port isn’t working
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
So, i’ve installed your update, i found something that will interest you:
I found why the hdd is recognized as a external drive:
HDD-bay SSD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT0@0/PMP@0
Ultrabay HDD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT1@1/PMP@0
The macbook pro has only one hdd, the second hard drive or sad must be external. It’s cosmetic, i have to change the drives.
I found that you fixed the display with F14 and F15, nice!
You know „About your mac“? There is a little bug, my Thinkpad shows „spdisplays_display“ integrated.
The next things are the important things:
Sound isn’t working if the headphones are connected with the dock.
The internal display is on while the TP is in the docking station, it should be of in the docking station
Lion is after about 1 minute usable, while this time, i cannot click or write, but i am able to move the cursor.
Ethernet is buggy, i have sometimes a APIPA adress, but after sleep it works again.
The sound works with the 21.01.2012 Update very well.
If i can help you with the docking station problem, feel free to ask!
Edited by Erdbeeere
Share this post
Link to post
Share on other sites
I’ll check this thing, should be easy. I did masking on my desktop hackinposh
Quote
I found why the hdd is recognized as a external drive:
HDD-bay SSD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT0@0/PMP@0
Ultrabay HDD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT1@1/PMP@0
The macbook pro has only one hdd, the second hard drive or sad must be external. It’s cosmetic, i have to change the drives.
Thats voodoops2 fix. Ideal way map brightness to system fn+home/end
Quote
I found that you fixed the display with F14 and F15, nice!
This possible. Guide later to come
Quote
You know „About your mac“? There is a little bug, my Thinkpad shows „spdisplays_display“ integrated.
I need two linux codec dumps from ubuntu 10.04 live cd
run in terminal
cat /proc/asound/card0/codec#0 > ~/Desktop/codecDump0.txt
or
cat /proc/asound/card0/codec#1 > ~/Desktop/codecDump1.txt
or
cat /proc/asound/card0/codec#2 > ~/Desktop/codecDump2.txt
do it with dock and without
Quote
Sound isn’t working if the headphones are connected with the dock.
The sound works with the 21.01.2012 Update very well.
If i can help you with the docking station problem, feel free to ask!
Now I’m try to figure out this bug with freeze screen after boot. You can temporary try to use GraphicsEnabler=Yes to fix that until dsdt section will be corrected
On 1/21/2012 at 9:08 PM, Erdbeeere said:
The internal display is on while the TP is in the docking station, it should be of in the docking station
Lion is after about 1 minute usable, while this time, i cannot click or write, but i am able to move the cursor.
Didn’t have ethernet problems at all before I replaced wi-fi intel module to atheros 9285 and start using only wi-fi. With some old E1000 next ethernet was unstable
but with new one its stable
Quote
Ethernet is buggy, i have sometimes a APIPA adress, but after sleep it works again.
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
Well, here is the dump:
Update: I enabled the GraphicsEnabler, but no difference.
Are you using the wlan card also with Windows 7? If yes, are you able to deactivate the card with FN+F5? However, thats important for me.
What wlan card do you recommend for me?
eBay is full of cards
http://www.ebay.at/i…#ht_3011wt_1165
Update 2: The new AppleIntelE1000e.kext from here have the same bug. If I plugged out the ethernet cable and plug it in, there will be a apipa adress and no adress from my dhcp. However, standby fixes the problem. (Tested in the dock, i havn’t tested it with the port on the T510)
Edited by Erdbeeere
Share this post
Link to post
Share on other sites
Ok
I’ll check dumps today or maybe tomorrow
No, fn+f5 don’t do anything with my wlan under osx, under win 7 it deactivate wireless cards. Think its possible to fix with dsdt Device (_QXX sections but I don’t need it for now
For Lenovo T and W series only half height card can be installed
Here is list of card with native support:
Atheros AR5B91
b/g up to 54mbps
Atheros AR5B93
2.4ghz b/g/n up to 150mbps in OSX
Atheros AR5BHB92
2.4 and 5ghz a/b/g/n up to 150mbps in OSX on 2.4ghz and up to 300 on 5ghz
Broadcom BCM94322HM8L
2.4 and 5ghz a/b/g/n up to 150mbps in OSX on 2.4ghz and up to 300 on 5ghz
On desktop hack I used AR5BXB92 full height card from 2010 iMac, this card doesn’t fit lenovo slot without little dremeling magnesium chassis of laptop. So I temporary replace Intel Wi-Fi Link 1000 to AR9285 from brother’s laptop. Asus has this card locked to b/g mode so max speed is only 54mbps. AR9285 with enabled N mode can operate up to 65mbps because of 1×1 MIMO configuration, that’s why OSX driver drops speed from 150mbps as possible with 1×2 and 2×2 configs.
So the best card I think is half AR9280 or possible AR9380 3×3 MIMO up to 450mbps on 5ghz. I ordered AR5BHB112 AR9380 card few weeks ago for replacement of AR9280.
http://www.ebay.at/s…-All-Categories
On 1/22/2012 at 1:48 PM, Erdbeeere said:
Well, here is the dump: t510-audio-dock.zip
Update: I enabled the GraphicsEnabler, but no difference.
Are you using the wlan card also with Windows 7? If yes, are you able to deactivate the card with FN+F5? However, thats important for me.
What wlan card do you recommend for me? eBay is full of cards http://www.ebay.at/i…#ht_3011wt_1165
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
The unuasble-time after start is about 140 seconds, i changed the GraphicsEnabler to yes, but no difference.
Maybe you are able to fix the bug with the screen: The ThinkPad is closed, only the external display at display-port should be display osx. I mean that only external devices should display something if the notebook is closed bud on.
I’ve seen jet that you are using a modded BIOS „
BIOS with removed whitelist + small DSDT mod + terminal“
What do you mean with small DSDT mod? Is that maybe the reason that the fan control doesn’t work?
Next thing that i have changed are the drives. I put the Lion HDD into the HDD-Bay and yet it is shown as a internal HDD – Great!
Are you able to share the BIOS-Update with us? I prefer BIOS Updates as a ISO
Share this post
Link to post
Share on other sites
I figured out freeze problem. That was HDMI audio patch. So I removed code from DSDT and replaced AppleHDA with older one
No freeze now and DisplayPort working fine with it
AppleHDA+dsdt-fixed-screen-freez.zip
On 1/22/2012 at 11:02 PM, Erdbeeere said:
The unuasble-time after start is about 140 seconds, i changed the GraphicsEnabler to yes, but no difference.
Maybe you are able to fix the bug with the screen: The ThinkPad is closed, only the external display at display-port should be display osx. I mean that only external devices should display something if the notebook is closed bud on.
I’ll try to figure out this case if it’s possible
On 1/22/2012 at 11:02 PM, Erdbeeere said:
Maybe you are able to fix the bug with the screen: The ThinkPad is closed, only the external display at display-port should be display osx. I mean that only external devices should display something if the notebook is closed bud on.
Ok I patched Lenovo bios version 1.47 to remove whitelist both WLAN and WWAN card slots. It works fine
Also found 1.48 version patched by one man
Whitelisted BIOS Lenovo T510/510i
Len_T510_6muj27us_NWL_ByCamiloml-1.48.zip
Small dsdt mod is to be able use AR9285 card that is not supported by default in osx. For cards listed above this mod is not necessary
To fix fan control on ThinkVantage button find
Method (_Q19, 0, NotSerialized)
and replace code to following, after that fan boost should work
Method (_Q19, 0, NotSerialized)
{
Name (FANS, One)
Store (HFSP, FANS)
XOr (FANS, 0x40, Local0)
If (Local0)
{
LED (0xFF, 0x80)
Store (0x40, HFSP)
}
Else
{
LED (0xFF, 0x80)
Store (0x80, HFSP)
}
}
On 1/22/2012 at 11:02 PM, Erdbeeere said:
I’ve seen jet that you are using a modded BIOS „
BIOS with removed whitelist + small DSDT mod + terminal“
What do you mean with small DSDT mod? Is that maybe the reason that the fan control doesn’t work?
Next thing that i have changed are the drives. I put the Lion HDD into the HDD-Bay and yet it is shown as a internal HDD – Great!
Are you able to share the BIOS-Update with us? I prefer BIOS Updates as a ISO
Here is guide how to fix this annoying spdisplay
[GUIDE] How to fix [spdisplays_display] in About This Mac window
On 1/22/2012 at 11:02 PM, Erdbeeere said:
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
Share this post
Link to post
Share on other sites
If tested OSX few days and in my opinion OSX Lion is running very stable and fast on the T510.
There are some bugs at the moment. joshhh, if you have time please fix it Just a summary:
– audio isn’t shown the correct volume if i am using the speaker of the notebook
– mic can’t be muted with the button on the keyboard (unnessesary, i know)
– the internal display is active if the display is closed and a external display is connected – the internal display should be of
– Fingerprint is buggy with the official driver from authentec
That components never worked:
Intel WLAN (I ordered on ebay another card, I am waiting for it)
Gobi 2000 WWAN Card (Just draming for a working solution )
Share this post
Link to post
Share on other sites
I use osx on my T510 about two month and it works perfect
I’m working on audio solution now, possible I’ll fix slider bug and hdmi audio too
display fixing is on the way too
fingerprint working not so precise as I expected, faster enter pass with keyboard than 4-5 times to swipe finger on reader, don’t use this capabilities now
On 1/24/2012 at 12:01 PM, Erdbeeere said:
– audio isn’t shown the correct volume if i am using the speaker of the notebook
– mic can’t be muted with the button on the keyboard (unnessesary, i know)
– the internal display is active if the display is closed and a external display is connected – the internal display should be of
– Fingerprint is buggy with the official driver from authentec
That components never worked:
Intel WLAN (I ordered on ebay another card, I am waiting for it)
Gobi 2000 WWAN Card (Just draming for a working solution )
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
So, i’ve tested Lion one week more and there are two other bugs/limitations:
* Don’t plug a battery in the notebook while its on, you will receive a OS X Bluescreen.
* Final Cut, iMovie and Quick Time isn’t able to play mpeg4 videos, its very buggy – I can’t use iMovie for video editing, thats bad.
Have you found some bugfix for the audio and display?
Share this post
Link to post
Share on other sites
Almost fixed sound bug with slider
sound output from dock station is limitation of dock not OSX, there is no any electronics between laptop out and dock out, only mechanical switch somewhere
Screen disable is not yet finally tested
On 1/31/2012 at 9:20 PM, Erdbeeere said:
So, i’ve tested Lion one week more and there are two other bugs/limitations:
* Don’t plug a battery in the notebook while its on, you will receive a OS X Bluescreen.
* Final Cut, iMovie and Quick Time isn’t able to play mpeg4 videos, its very buggy – I can’t use iMovie for video editing, thats bad.
Have you found some bugfix for the audio and display?
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
LAN Intel E1000 kext not working after 10.7.3 update, need something to deal with it
AR9285 not working too, but if I revert to 10.7.2 driver it’s working again
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
On 2/4/2012 at 7:20 AM, joshhh said:
LAN Intel E1000 kext not working after 10.7.3 update, need something to deal with it
AR9285 not working too, but if I revert to 10.7.2 driver it’s working again
I just updated to 10.7.3 and my Intel E1000 is working. In fact there is no new kext for it in the update, so not sure why yours is not working. Maybe reinstall the files? I have attached my kext if you want to compare.
I have BRCM4322 wireless and that is also working without needing changes.
Share this post
Link to post
Share on other sites
Thanks for this stuff 
in fact i have a T410, i’ll try your source on it.
It’s a pleasure to see a community that seems to live :-).
i propose to feed back about my T410 and yours stuff
even if i cannot modify my bios (locked with password)
best regards
Share this post
Link to post
Share on other sites
T410 is absolutely working solution for OSX with Intel3000HD or Nvidia discrete graphics, other things is almost same as in T510
Ask your questions for help
And I think you can find whitelisted bios on mydigitallife.com site in bios request section
On 2/7/2012 at 8:02 PM, Tetonne said:
Thanks for this stuff
in fact i have a T410, i’ll try your source on it.
It’s a pleasure to see a community that seems to live :-).
i propose to feed back about my T410 and yours stuff
even if i cannot modify my bios (locked with password)
best regards
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Share this post
Link to post
Share on other sites
On 2/7/2012 at 8:08 PM, joshhh said:
T410 is absolutely working solution for OSX with Intel3000HD or Nvidia discrete graphics, other things is almost same as in T510
Ask your questions for help
And I think you can find whitelisted bios on mydigitallife.com site in bios request section
Waoou Thanks for the tip
but i think that the bios update is not possible on my firm’s computer (bitlocked), it ask for the 128bit key 🙁
AHCI mode OK now
Share this post
Link to post
Share on other sites
You can check your hdd connection state from windows with tool like AIDA 64
In my case AHCI was enabled by default
On 2/7/2012 at 9:05 PM, Tetonne said:
Waoou Thanks for the tip
but i think that the bios update is not possible on my firm’s computer (bitlocked), it ask for the 128bit key 🙁
i’m preparing the hackintosh hd even i’m not able to change AHCI
as asked there „be sure in your BIOS under Config > SATA > Mode Option is set to AHCI“
tips are welcome 😉 as Erdbeeere begin on T410 treat
All the best
do i have to change something for busration it is 18 here?
MacBook Pro 15″ Retina 2.7Ghz/16Gb/512Gb SSD
HackBook Pro 1: Lenovo T510i – Core i7-640M 2.8GHz, NVidia NVS 3100M 512Mb, 8Gb RAM, LAN Intel 82577, WLAN AR9280, BT, Sound cx20585 (AppleHDA), eSATA, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4/10.7.5/10.6.8HackBook Pro 2: Lenovo W530 – Core i7 3740QM 2.7GHz, Intel HD4000, Nvidia Quadro K2000M, 20Gb RAM, LAN Intel 82579, WLAN Intel 6205, BT, CardReader, ExpressCard, Screen 1920×1080 AUO B156HW01 V5 95% Gamut. Clover boot loader r1334 + 10.8.4
Schreibe einen Kommentar